GK615-X
DV 16800.03 Issue 1 12/11
Page 3-9
3.2.2.5 Squelch
In normal operation (no menu opened) the squelch can be toggled between on and off state by short
press of the “SQL/IC” key.
Squelch On (left) / Squelch Off (right)
If the squelch function is active (on), noisy signals will be muted.
The threshold for the squelch can be adjusted in the pilots menu.
3.2.2.6 Storage Function
The transceiver has two kind of storage functions implemented:
- Manual storing of frequencies
- Automatically storing of frequencies
3.2.2.7 Manual Storage Function
Manual storage of frequencies can be activated by pressing “STO” key in standard mode, direct tune or
scan mode.
During storage procedure the display will look similar to the channel mode. But as difference “STO” is
displayed on left side of the display. On the top line active frequency is indicated. On the bottom line
channel number is indicated. If channel is free, then ”FREE” is displayed. If channel contains already
an earlier stored frequency ”USED” is displayed.
“FREE” and “USED” channel indication.
By entering the storage procedure, the transceiver will first propose the next free channel for storing the
active frequency. Beside the proposed channel also every other channel in range 10 to 99 can be se-
lected by turning the rotary knob. For every selected channel “USED” or “FREE” will be indicated re-
spectively.
By pressing the “STO” key once again, the active frequency will be stored on selected channel, inde-
pendent if the channel is “FREE” or “USED”. Afterwards transceiver will automatically go back to pre-
vious mode (standard mode / direct tone mode / scan mode).
Summary of Contents for GK615-X
Page 12: ...Page 2 II DV 16800 03 Issue 1 12 11 GK615 X Blank...
Page 16: ...Page 2 4 DV 16800 03 lssue 1 12 11 GK615 X Fig 2 4 Dimensions of portable VHF Station GK615 X...
Page 18: ...Page 2 6 DV 16800 03 lssue 1 12 11 GK615 X Fig 2 6 Car mounting bracket and handle GK615 X...
Page 20: ...Page 3 II DV 16800 03 Issue 1 12 11 GK615 X Blank...