Resolver output
standard as per ARINC 407
VOR/LOC needle output
max. of 3 pointers and/or flags
with 1 k
W
each
VOR/LOC warning flag output
max. of 3 pointers and/or flags
with 1 k
W
each
TO/FROM output
max. of 3 pointers and/or flags
with 1 k
W
each
Autopilot output
for VOR course tracking and
ILS mode
q
GS receiver and functions in the NR 3320 - (01) / - ( 02)
Receiver type
single-conversion super-
heterodyne receiver
Frequency range
329.15 MHz . . . 335.00 MHz
No. of channels
40
Channel spacing
150 kHz
Sensitivity
£
-80dBm for complete
disappearance of warning flag
Bandwidth
³ ±
20 kHz at 6 dB
Selectivity
³
42 dB at
D
F
³
150 kHz
BECKER NR 3320 - ( ) / NR 3330 - ( )
Page 30
Issue 12/97
IMPORTANT
Carefully read these operating instructions right through before attemp-
ting to operate the NAV receiver.
Keep these operating instructions carefully. They contain important sa-
fety and operating instructions for the NAV receiver.
INTRODUCTION
Thank you for purchasing the BECKER NAV receiver. The NAV recei-
ver can be installed in the instrument panel or centre console or opera-
ting console and is easy to operate. The technology used is to the state
of the art.
To fully utilise the capabilities of your NAV receiver, please carefully
read these operating instructions right through before you start opera-
ting the set.
If you have any questions regarding the operation of the NAV recei-
ver, please get in touch with your nearest Becker Dealer or with the Be-
cker Product Support.
Operating Instructions
Issue 12/97
Page 3
