SAR-DF 517
DV 77513.03 Issue 4 09/2006
Page 3-3
External (remote) dimming:
When a voltage >1V DC at the dimming input exists, the brightness is controlled externally, but
remains additionally adjustable on the display unit. (See plan interwiring and operating/edit-
menu).
2
>
PAGE
< Rotary switch to select the displayed active page and its corresponding operating mode.
The current page number (1 to 6) is indicated in the display top right.
3
>
LC-graphic display
< (128x64 dots, supertwist, dark blue on yellow-green background.
3.3.
Bearing mode
The device works in the bearing mode. As soon as a signal is received (receiving level above squelch
level) the unaveraged maximal bearing values (spread) are indicated and, if interpretable, the
averaged bearing value. Having received a signal, the last bearing value is shortly shown flashing,
until the internal average bearing value store is cancelled after the time-hold span (see edit-menu)..
3.3.1. Operating elements in bearing mode:
Fig. 3-3 Operating elements in bearing mode
1
>
FREQUENCY
< Rotary switch selecting the active frequency. The last selected frequency re-
mains stored after switching the device off/on. The selected frequency is shown on the graphic
display bottom right. The following order of frequencieses possible:
