18
BECKER VADS 1500+
DANGER
Danger to life due to electric shock
Electrical work may only be carried out by trained specialist personnel.
To perform tasks and activities on the electrical system of the installation, work must be carried out in accordance
with the five safety regulations according to DIN VDE 0105:
1. Isolation
2. Secure against restarting
3. Determine and document absence of voltage
4. Grounding and short-circuiting
5. Cover or fence off adjacent live parts
DANGER
Danger to life due to electric shock
There is an immediate danger to life in case of contact with live parts. Damage to the insulation or individual
components can be life-threatening.
Therefore:
•
If the insulation is damaged, switch off the power supply immediately and arrange for repairs.
•
Only allow work on the electrical machine to be carried out by qualified electricians.
•
Whenever working on the electrical machine, disconnect it from the power supply and check that it is not live.
•
Before maintenance, cleaning and repair work, switch off the power supply and secure it against being
switched on again.
•
Do not bypass or disable fuses. When replacing fuses, observe the correct amperage.
•
Keep moisture away from live parts. This can lead to a short circuit.
WARNING
Risk of injury from slipping, tripping and falling
Obstacles and danger spots, especially exposed floor slabs and with coolants and lubricants contaminated
areas, shall be clearly marked.
The obstacles and danger points are to be provided with a sturdy double-sided warning sign that is
contains the warning „Caution - danger of slipping“ or „Caution - danger of falling“ in text and as a symbol.
Large danger areas must be secured with barrier tapes, chain barrier systems and warning cones. The operator
of the machine is responsible for ensuring road safety.
NOTE
Wear chemical protective gloves
Caution: Danger of scalding from 100°C hot oil!
2.18 DISPOSAL
The VADS 1500+ is disposed of in a dismantled state. During dismantling, the safety instructions in chapter 2.16 „Dis-
mantling / decommissioning“ must be observed. The main hazards during disposal are the transport of machine parts
and the disposal of environmentally harmful operating materials.
WARNING
Risk of injury from slipping, tripping and falling
Obstacles and danger spots, especially exposed floor slabs and with coolants and lubricants contaminated
areas, shall be clearly marked.
The obstacles and danger points are to be provided with a sturdy double-sided warning sign that is
contains the warning „Caution - danger of slipping“ or „Caution - danger of falling“ in text and as a symbol.
Large danger areas must be secured with barrier tapes, chain barrier systems and warning cones. The operator
of the machine is responsible for ensuring road safety.
