Operating Instructions WSTE 500 and WSTE 1000
19
E
N
G
L
I
S
H
Thank you for purchasing the BECKER door control, WSTE 500 and WSTE 1000.
The WSTE 500 and WSTE 1000 controls are high quality products with many advantages and performance fea-
tures:
• Radio Remote command of the drive
• radio can be retrofitted
• error code display
• settable automatic reclosing feature
• sensor for bottom pneumatic safety edge (electrical safety edge or pneumatic safety edge with
testing)
• settable partial opening (e.g. as half door opening) on the WSTE 1000
• traffic light function
• cycle counter
Please adhere to these instructions when installing or adjusting the system.
Introduction
Warranty
BECKER
-Antriebe GmbH will be released from all guarantee and product liability obligations if the customer modi-
fies the equipment without prior approval from
BECKER
-Antriebe GmbH or if the equipment is installed incorrectly
and/or contrary to the specified installation instructions, by the customer or a third party.
Any further processing must comply with all current statutory and official regulations
governing manufacture and advice to customers, especially the EN 12453.
This product is subject to technical developments and improvements. Please refer to the current sales brochure for
the precise product specifications.