Beckett SDC 24 VDC, User Manual

2

Contents

Burner Application Scope and Intended Use ........... 2
Prepare Before Installing ............................................ 3

Notice Special Requirements.............................................3
Speci

fi

 cations .....................................................................3

General Information .................................................... 4

A. Equipment Located in Con

fi

 ned Space .........................4

B. Exhaust Fans and Other Air-Using Devices. ...................... 4
C. Clearances to Burner and Equipment ...........................4
D. Exhausting Hazardous Fumes ......................................4

Nozzle Assembly Maintenance .................................. 4

A. Replace the Burner Nozzle............................................4
B. Check/Adjust Electrodes ...............................................5
C. Igniter Maintenance .......................................................6
D. Servicing Nozzle Line Assembly ...................................6
E. Check/Adjust “Z” Dimension ..........................................6

Fuel Supply .................................................................. 7

A. Connect Fuel Lines........................................................7
B. Fuel Supply Level with or Above Burner........................7
C. Fuel Supply Below Level of Burner ...............................7
D. Fuel Line Replacement (Remote Tank Only) ................7
E.  Fuel Line Valve and Filter .............................................7

Burner Wiring ............................................................... 8

A. Burner installed on equipment .......................................8
B. Burner Replacement......................................................8

Drive Component Maintenance .................................. 9

A. Motor, Blower Wheel, & Coupling Replacement............9
B. Pump Maintenance........................................................9
C. Solenoid Valve Testing ................................................10

Start Up Burner & Set Combustion .......................... 10

A. Basic Burner Operation ...............................................10
B. Combustion Set-up ......................................................10
C. Set Combustion with Instruments................................10

Maintain & Service Burner ........................................ 11

A. Owner’s Information .................................................... 11
B. Owner Service and Maintenance  ............................... 11
C. Extended Down Time .................................................. 11
D. Regular Service/Maintenance ..................................... 11

Troubleshooting ........................................................ 12
Replacement Parts .................................................... 14
Limited Warranty Information .................................. 16

Hazard De

fi

 nitions

Within the boundaries of the hazard warning, there will 
be information presented describing consequences if the 
warning is not heeded and instructions on how to avoid 
the hazard. 

Intended to bring special attention 
to information, but not related to 

personal injury or property damage.

Indicates a hazardous situation, 
which, if not avoided, could 

result in minor or moderate injury. 

Indicates a hazardous situation, 
which, if not avoided, could 

result in death or serious injury.

Indicates a hazardous situation, 
which, if not avoided, will result 

in death or serious injury.

Burner Application Scope 

and Intended Use

The SDC burner is designed for use in road 
maintenance equipment applications that 
have DC voltage charging systems capable of 
sustaining the speci

fi

 ed voltage requirements. 

For other equipment applications, please contact 
Beckett Technical Services at 1-800-645-2876.