Handling
Planetary gear unit LPxxx
11
Version: 1.6
4
Handling
4.1
Transport
• No special mode of transport is prescribed for the gear unit.
• Only by qualified personnel
• Only in the manufacturer's original packaging
• For weights refer to the Beckhoff website.
• Avoid shocks.
• Temperature: 0 °C to +40 °C
• If the packaging is damaged check the gear unit and any accessories for visible damage. Inform the
transport company and, if necessary, the manufacturer.
WARNING
Suspended loads may fall and cause serious injury or death.
• Never stand under suspended loads.
• Secure the gear unit with suitable fastenings (e.g. straps) prior to transport.
NOTE
Hard impacts, e.g. due to falling or dropping, may damage the gear unit.
• Use only lifting gear and load handling devices with sufficient load-bearing capacity.
• Do not exceed the permitted lifting weight.
• Set the gear unit down slowly.
4.2
Packaging
• Recyclable cardboard with inserts
• Dispose of the packaging materials at designated disposal sites.
Observe the relevant national disposal regulations
4.3
Storage
• The gear units must not be stored outdoors. The storage space must be adequately ventilated and dry.
• The gear units may only be stored in the original recyclable manufacturer's packaging.
• The gear units may only be stored in a horizontal position.
• Storage temperature: 0 °C to +40 °C in the original packaging
• Storage time: 2 years max.