BIOS settings
CB1067
62
Version: 1.0
6.3.11
USB Configuration
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Advanced
┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐
│ USB Configuration │Enables Legacy USB support. │
│ │AUTO option disables legacy │
│ USB Module Version 23 │support if no USB devices are │
│ │connected. DISABLE option will │
│ USB Controllers: │keep USB devices available │
│ 1 XHCI │only for EFI applications. │
│ USB Devices: │ │
│ None │ │
│ Legacy USB Support [Enabled] │ │
│ XHCI Hand─off [Enabled] │ │
│ USB Mass Storage Driver Support [Enabled] │ │
│ ├────────────────────────────────┤
│ USB hardware delays and time─outs: │→←: Select Screen │
│ USB transfer time─out [20 sec] │↑↓: Select Item │
│ Device reset time─out [20 sec] │Enter: Select │
│ Device power─up delay [Auto] │+/─: Change Opt. │
│ │F1: General Help │
│ │F2: Previous Values │
│ │F3: Optimized Defaults │
│ │F4: Save & Reset │
│ │ESC: Exit │
│ │ │
└─────────────────────────────────────────────────────────────────┴────────────────────────────────┘
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Bios entry
Options
USB Configuration
USB Module Version
None
USB Controllers:
1XHCI
None
USB Devices:
None
None
Legacy USB Support
Enabled / Disabled / Auto
XHCI Hand-off
Enabled / Disabled
USB Mass Storage Driver Support
Enabled / Disabled
USB hardware delays and time-outs:
USB transfer time-out
1 / 5 / 10 / 20 sec
Device reset time-out
10 / 20 / 30 / 40 sec
Device power-up delay
Auto / Manual
