Product overview
CP39xx-14xx-0010
17
Version: 1.1
3.3
Optional interface
You can expand the Control Panels beyond the basic equipment to include an externally routed USB
interface in the mounting arm adapter. The following ordering option is available for this purpose.
Table 7: USB interface ordering option
Options
Description
C9900-E299
Single-port USB-A interface with stainless steel IP65 screw cap, outlet in the side panel of
the C9900-M759 mounting arm adapter; IP65 USB A plug on other side, occupies the
USB port in the connection section, single part, not mounted
4
3
2
1
Fig. 10: CP39xx-14xx-0010_optional USB interface
Table 8: USB interface pin assignment
Pin
Assignment
Shield
GND
1
Vbus
2
D -
3
D +
4
GND
3.4
Optional RFID readers
The stainless steel Control Panels can be extended with an integrated RFID reader in the push button
extension. The following ordering option is available for this purpose.
Table 9: RFID reader ordering option
Options
Description
C9900-E295
RFID reader for ISO14443 A/B, ISO 15693, Mifare
Classic, Mifare Plus, Mifare DESFire,
Legic RF standards, Sony FeliCa read/write, 13.56
MHz, connection via USB, mounted under the front
laminate
3.5
Optional maintenance kit
The C9900-M759 mounting arm adapter connects the Control Panel to the mounting arm system and
protects the connections and cables from aggressive cleaning agents, water and dirt. The seals of the
mounting arm adapter should therefore be checked regularly for tightness. A replacement seal kit C9900-
Z494 is available for replacing worn seals. The set contains all the required seals and screws for C9900-
M735, C9900-M736, C9900-M759 and C9900-M764.
Table 10: Maintenance set ordering option
Option
Description
C9900-Z494
Replacement seals, accessories and mounting
hardware for C9900-M759, C9900-M764, C9900-
M735 and C9900-M736
