Product Description
Connector description
DVI (Digital Visual Interface)
DVI-D
The DVI connection
(X101)
is used for transferring the video signal from
the Industrial PC to the Control Panel.
The purely digital part (DVI-D) is supported.
Power supply
Power supply
The power supply for the Control Panel is established via the 4-pole M12
socket
(X102).
USB interfaces
USB input
The Control Panel is connected with the Industrial PC via the USB1.1 port
(X103).
USB1.1 standard
with a maximum data rate of 1.5 or 12 Mbps
is
supported.
Protective Earthing
Protective Earthing
The low resistance protective earthing connection is
established via the ground bolt, which is located at the rear of
the housing.
Cable Set for connecting the Control Panel
Cable Set
C9900-K514
Kit for connecting CP78xx, containing:
DVI-cable 3 m, USB-cable 3 m and power supply connector with
IP65-connector at the Control Panel
6
CP78xx
