Configuration
CU8130-0120
32
Version: 1.0
Setting or
function
Value range
Default value
Description
Last service
date:
01.01.11*
-
-
Shows the actual set battery replace/service date (last
service on 1 January 2011).
Next service
date:
01.01.16*
-
-
Shows the estimated next battery replace/service date
(next service on 1 January 2016).
Reset service
interval
remainder...
-
-
Updates the record of the most recent battery change
and resets the service interval remainder messages. The
date is stored in the UPS's EEPROM, and can be
examined in the UPS information dialog.
update to:
25.05.12*
-
-
Shows the suggested service interval update date shown
in the "Reset service interval" command dialog (25 May
2012).
Update
firmware...
-
-
Starts a firmware update.
Self test
-
-
Executes a self-test and displays the result:
• "OK" - Test successful, the battery is OK;
• "BT" - Failed because the battery capacity was
insufficient, or because a battery is not even present;
• "NG" - Failed as a result of overload;
• "NA" - Test function does not exist;
Factory
Defaults
-
-
Restores the factory (default) settings. The default battery
type setting is: C9900-U330. Please check your real
battery type configuration.
OK
-
-
Saves all settings and closes the dialog. Don't forgett to
apply the changes at the Beckhoff UPS Configuration
dialog too.
Cancel
-
-
Discards all editable changes.
*) Example value.
Summary of Contents for CU8110-0120
Page 1: ...Manual EN CU8130 0120 Uninterruptible Power Supply Battery backed 1 14 2021 Version 1 0 ...
Page 2: ......
Page 56: ......