Commissioning
EL125x, EL2258
83
Version: 2.5
• the devices/modules be connected to the power supply and ready for communication
• TwinCAT must be in CONFIG mode on the target system.
The online scan process consists of:
•
detecting the EtherCAT device [
}
88]
(Ethernet port at the IPC)
•
detecting the connected EtherCAT devices [
}
89]
. This step can be carried out independent of the
preceding step
•
troubleshooting [
}
92]
The
scan with existing configuration [
}
93]
can also be carried out for comparison.
6.2.5
OFFLINE configuration creation
Creating the EtherCAT device
Create an EtherCAT device in an empty System Manager window.
Fig. 96:
Append EtherCAT device (left: TwinCAT 2; right: TwinCAT 3)
Select type ‘EtherCAT’ for an EtherCAT I/O application with EtherCAT slaves. For the present publisher/
subscriber service in combination with an EL6601/EL6614 terminal select “EtherCAT Automation Protocol
via EL6601”.
Fig. 97:
Selecting the EtherCAT connection (TwinCAT 2.11, TwinCAT 3)
Then assign a real Ethernet port to this virtual device in the runtime system.
Fig. 98:
Selecting the Ethernet port
