Appendix
EL3773
166
Version: 2.5
In (A) TwinCAT 2.11 shows that the Online CoE directory is currently displayed. If this is not the case, the
Online directory can be loaded via the
Online
option in Advanced Settings (B) and double-clicking on
AllObjects
.
8.2.3
Updating controller firmware *.efw
Note
CoE directory
The Online CoE directory is managed by the controller and stored in a dedicated EEPROM,
which is generally not changed during a firmware update.
Switch to the
Online
tab to update the controller firmware of a slave, see Fig.
Firmware Update.
Fig. 181: Firmware Update
Proceed as follows, unless instructed otherwise by Beckhoff support. Valid for TwinCAT 2 and 3 as
EtherCAT master.
• Switch TwinCAT system to ConfigMode/FreeRun with cycle time >= 1 ms (default in ConfigMode is 4
ms). A FW-Update during real time operation is not recommended.
Summary of Contents for EL3773
