Product overview
KL2532/KS2532, KL2552/KS2552
15
Version: 3.2.0
2.5
KL2552 - LED displays
Fig. 5: KL2552 - LEDs
Left LED prism
LED
Display
Run (green)
on
Data transmission on the K-bus is active
Enc. A: A (green) on
There is a signal at input A for encoder A.
Enc. B: A (green) on
There is a signal at input A for encoder B.
Input 1 (green)
on
There is a signal at input 1.
Enc. Rdy. (green) on
Encoder evaluation ready to operate.
Enc. A: B (green) on
There is a signal at input B for encoder A.
Enc. B: B (green) on
There is a signal at input B for encoder B.
Input 2 (green)
on
There is a signal at input 2.
Right LED prism
LED
Display
Drv. Rdy. (green) on
Motor driver ready to operate.
Enable A (green) off
Channel 1 is either not enabled or not ready to operate.
on
Channel 1 is enabled and is ready to operate.
Warning A
(yellow)
on
Warning of channel 1
Error A (red)
on
There is an error at channel 1
Power (green)
off
The motor supply voltage is not available.
on
The motor supply voltage is available.
Enable B (green) off
Channel 2 is either not enabled or not ready to operate.
on
Channel 2 is enabled and is ready to operate.
Warning B
(yellow)
on
Warning of channel 2
Error B (red)
on
There is an error at channel 2
