Product overview
2.6
KL2545 - LED displays
Fig. 4: KL2545 - LEDs
Left LED prism
LED
Display
Run (green)
on
Data transmission on the K-bus is active
Enc. A: A (green)
on
There is a signal at input A for encoder A.
Enc. B: A (green)
on
There is a signal at input A for encoder B.
Input 1 (green)
on
There is a signal at input 1.
-
reserved
Enc. A: B (green)
on
There is a signal at input B for encoder A.
Enc. B: B (green)
on
There is a signal at input B for encoder B.
Input 2 (green)
on
There is a signal at input 2.
Right LED prism
LED
Display
-
reserved
Enable A (green)
off
Channel 1 is either not enabled or not ready to operate.
on
Channel 1 is enabled and is ready to operate.
-
reserved
Error A (red)
on
There is an error at channel 1
Load Power (green)
off
The power supply voltage for the load is absent (less than 7 V).
on
The power supply voltage for the load is present (more than 8 V).
Enable B (green)
off
Channel 2 is either not enabled or not ready to operate.
on
Channel 2 is enabled and is ready to operate.
Warning (yellow)
on
The internal temperature has risen to more than 80°C, or the power supply voltage has
dropped.
Error B (red)
on
There is an error at channel 2
KL2535, KL2545
12
Version: 2.0.0
