Configuration software KS2000
KL2751/KS2751, KL2761/KS2761
33
Version: 3.1.0
5.4
Settings
The dialog mask for the parameterization of the KL2751/KL2761 can be found under
Settings
.
Fig. 21: Settings via KS2000
Operating mode
•
Watchdog timer active (
)
Here you can deactivate the watchdog (default: active).
•
Watchdog timer active (
)
Here you can activate user scaling (default: inactive).
•
)
Here you can switch the dimming ramp from relative (default) to absolute.
◦ With the relative dimming ramp, the dimmer terminal requires the preset
to
ramp up the brightness from 0 to full scale control.
◦ With the absolute dimming ramp the dimmer terminal requires the preset
to
perform the current specified brightness change.
Note
Absolute dimming ramp
The use of the absolute dimming ramp is useful, for example, when you want to control two
lamps with two dimmer terminals synchronously.
Sample:
Lamp 1 is lit with 10 % brightness, lamp 2 with 30 % brightness.
Dimmer terminal 1 should now control lamp 1 and dimmer terminal 2 lamp 2 up to 50 %
brightness.
With an absolute dimming ramp, both lamps reach 50 % brightness at the same time.
Register values
•
User offset (
)
You can specify the offset for the user-scaling here (default: 0).
•
User gain (
)
Here you can specify the user scaling gain (default: 1).
