Overview
PS1021-2405-0000
5
Version: 1.0
1
Overview
PS1021-2405-0000 | Power supply 24V, 5A, single phase
• AC 100-120V / 200-240V input with automatic selection
• Width only 39mm
• Efficiency of up to 92.3%
• Full power between -10°C and +55°C
• Including DC-OK relay contact
The PS1021-2405-0000 is a 1-phase 24 V power supply with an output current of 5 A and an output power
of 120 W.
On the input side, the device has a wide-range input and an input inrush current limitation.
The output operates according to the UI characteristic curve and switches to the safe hiccup mode in case of
overload/short-circuit.
The power supply is part of the PS1000 family and has a width of 39 mm. A DC OK LED and a potential-free
relay contact monitor the status of the output voltage.
Overview of technical data
*)
Overview of technical data
PS1021-2405-0000
Output voltage
DC 24V
Adjustment range
24 - 28V
Output current
for AC 110-120 / 220-240V mains:
5.0 - 4.3A at 24-28V, <55°C
3.1 - 2.7A at 24-28V, <70°C
for AC 100 / 200V mains:
5.0 - 4.3A at 24-28V, <50°C
2.5 - 2.1A at 24-28V, <70°
Output ripple
< 100mVpp, 20Hz to 20MHz
Input voltage AC
AC 100-120 V / 220-240V (±10%, auto select)
Mains frequency
50-60Hz ±6%
Input current AC
1.72 / 1.05A at 120 / 230Vac
Power factor
0.64 / 0.54 at 120 / 230 Vac
Efficiency
91.2% / 92.3% at 120 / 230Vac
Temperature range
-10°C to +70°C (in operation)
Dimensions (W x H x D)
39 x 124 x 124 mm
(without DIN rail)
Weight
370 g
Approvals/markings
CE
cULus
EAC
*) All values typical for 24V, 5A, 230Vac, 50Hz, +25°C ambient temperature and after a warm-up time of five
minutes, unless otherwise stated.
