1-15
Specifications and Preinstallation Requirements
Figure 1-5. Checking the Rotor for Drive Pins
USING THE JCF-Z CONTINUOUS FLOW/ZONAL ROTOR
Zonal Bracket Kits
A special bracket and mounting hardware are required when the
JCF-Z Continuous Flow/Zonal Rotor is used. These parts are
contained in the Zonal Bracket Kit (part number 366431). The Zonal
Bracket Kit includes a bracket, mounting hardware, and assembly
instructions. This kit is for use with Cole-Parmer tubing size 16
(6.4 mm [
1
/
4
-in.] O.D.), the tubing size most commonly used with the
JCF-Z rotor.
Two additional kits are available, one which contains adapters for
size 14 tubing (4.8 mm [
3
/
16
-in.] O.D.) and one which contains
adapters for size 15 tubing (9.6 mm [
3
/
8
-in.] O.D.). If you wish to use
either of these sizes of tubing, you will need to purchase one of these
kits in addition to the basic kit (366431).
Rotor
Drive
Hole
Drive Pins
(Angled pins shown;
pins can also be
vertical or horizontal.)
Drive Spindle Assembly
Top View
Side View
B
EC
KMAN
B
E
CKMAN