Specifications
Specifications are subject to change without notice.
Specification
Details
Dimensions (W x D x H)
343 x 337 x 482 mm (13.5 x 13.3 x 19.0 in.)
Weight
10.7 kg (23.6 lb)
Power requirement
External Class III power adapter:
100–240 VAC, 50–60 Hz, 2.5 A input;
24 VDC, 3.75 A output
Instrument: 24 VDC, 75 W maximum
Viscosity limits
< 50 cp
Coincidence loss limit
7,500
Operating temperature
5 °C to 40 °C (41 °F to 104 °F)
Operating humidity
0 to 80% relative humidity for temperatures
up to 31 °C decreasing linearly to 50% RH at
40 °C
Maximum altitude
2,000 m (6,560 ft)
Sample bottle clearance
153 mm (6.02 in.)
Sample temperature
5 °C to 40 °C (41 °F to 104 °F)
Flow rate
10 to 100 mL/min (determined by the sensor
calibration flow rate)
Flow rate accuracy
> 95%
Volume accuracy
> 95% of syringe size
1
Tare volumes for probes
0.091 mL for 8.1 cm (3.2 in.)/1.2 mm
(0.047 in.) ID
0.172 mL for 15.4 cm (6.1 in.)/1.2 mm
(0.047 in.) ID
1.57 mL for 14 cm (5.5 in.)/large bore
Specification
Details
Sensor concentration limits
(particle per ml)
HRLD150: 18,000
HRLD150JA: 18,000
HRLD400: 10,000
HRLD600JS: 6,000
MC05: 9,000
Wetted materials
PTFE Teflon
®
, TFE Teflon, PFA Teflon, Kel-F,
316 Stainless steel, Glass, Viton
®
Number of channels
4 (2 for light scatter, 2 for light extinction)
Number of bins
65,536 (16,384 bins per channel)
Certification
CE
1
Under ideal conditions, inaccuracy in flow rate is ≤1% of syringe size.
General information
In no event will the manufacturer be liable for direct, indirect, special,
incidental or consequential damages resulting from any defect or
omission in this manual. The manufacturer reserves the right to make
changes in this manual and the products it describes at any time, without
notice or obligation. Revised editions are found on the manufacturer’s
website.
Safety information
N O T I C E
The manufacturer is not responsible for any damages due to misapplication or
misuse of this product including, without limitation, direct, incidental and
consequential damages, and disclaims such damages to the full extent permitted
under applicable law. The user is solely responsible to identify critical application
risks and install appropriate mechanisms to protect processes during a possible
equipment malfunction.
Please read this entire manual before unpacking, setting up or operating
this equipment. Pay attention to all danger and caution statements.
English
3
Summary of Contents for HIAC 9703+
