MD3150/3060
Copyright BEGLE GmbH, All rights reserved.
Page 8
Internet: www.bue.de
Mode 4:
Display interval-measured values.
Mode display
Small display
Large display
4
Memory location no.
Temperature
Pressing the plus / minus keys displays the temperature values of the last-saved
series. The
small display
shows the memory location number and the
large display
shows the temperature value at this location.
Holding the plus/minus key pressed automatically increments/decrements the
memory location number (auto-increment).
If an interval measurement is active (mode 3), mode 4 is skipped.
Mode 5:
Display min, max, mean values
Mode display
Small display
Large display
5
0 : Min, 1 : Mean, 2 : Max
Tmin , Tmean , Tmax
Pressing the plus key shows 0, 1, 2 in the
small display
.
The
large display
shows the appropriate minimum, mean and maximum, temperature
values. These memory entries are automatically deleted when the next interval
measurement is started (mode 3).
The above 3 values can be deleted manually with the minus key.
In this case the values -20°C , 0°C , +120°C (MD3150) resp. –200°C,0°C,1150°C
(MD3060) (measuring value limits) appear at these 3 locations.
Mode 6:
Set trigger threshold
Mode display
Small display
Large display
6
Trigger threshold (temp.)
The trigger threshold (temperature value at which an interval measurement is started
when the set value is exceeded or undershot in mode 3) can be set with the
plus/minus key. To facilitate the setting, this setting has auto-increment feature (keep
key pressed).