© BECOM Systems 2019
5
|
15
Quick Start Guide - Argos3D-P23X
Last change: 30 January 2019/Version 2
1
Unboxing
1.1
In the box
•
Argos3D
–
P23x
•
CAT5/7 Ethernet Cable
•
Interface Breakout-Board
•
Quick Start Guide
•
Power Supply
Note
The power supply’s operating temperature is specified from 0 to +40°C. This represents not
the effective working temperature of the Argos3D
–
P23x sensor!
1.2
Connecting your Argos3D
–
P23x
1.3
Connector Overview
The Argos3D-P23x uses one common connector for power and interfaces. For test purposes the KIT contains a
breakout-board to have individual access to the interfaces of the Argos3D-P23x.
The break-outboard has three main interfaces:
a.
Power Connector
b.
Ethernet
c.
Argos3D-P23x common connector
a
b
c
Figure 1-1: Argos3D
–
P23x break-out board front and rear view
