HART Device Configuration
Chapter 5
10/11/18
Bedrock Secure OSA Remote User Manual - BRDOC020_001
45
7. Click OK. A list of available DTMs will be displayed as shown in
Figure 5-7. These will be Controller-Local Interconnect DTMs or
Controller-Gateway DTMs.
Figure 5-7 Controller Gateway DTMs
8. For an OSA Remote, add a Controller-Local Interconnect DTM. The
DTM can be added either automatically or manually. Select the
communication DTM in Network View and then choose one of the
following:
•
To automatically add a Controller-Local Interconnect DTM,
click Scan and Select on the Topology tab in the Ribbon. The
Bedrock FDT will query the network for available OSA
Remotes. Go to step 9.
•
Or
to manually add a DTM to your network topology without
querying the network, click the plus sign next to the DTM
name (see Figure 5-7) in the Device Catalogue. Go to step 10.
