Chapter 1
9/3/21
Bedrock SPS.500 User Manual - BRDOC125_007
1
Bedrock SPS.500 Overview
The Bedrock SPS.500 is an Ethernet enabled, 24 V DC power supply designed
for use in a number of applications including IIoT, distributed control systems,
and industrial automation applications. Users of existing applications can retrofit
using the SPS.500 inside or outside enclosures, anywhere in a plant, and in harsh
environments. Product specifications, installation instructions, and operating
information are included in this manual.
The SPS.500 accepts universal AC input voltages. An “OR”ing output is
available for a redundant power supply configuration. The SPS.500 can be
integrated with a Bedrock UPS.500 to provide continuous power to a Bedrock
Control System in the event of a power failure. See the
Bedrock UPS.500 User
Manual
for more information.
The SPS.500 supports 10/100 Mbit Ethernet IPv4 and IPv6 communication.
Network clock synchronization is provided using the IEEE
-
1588 Precision Time
Protocol (PTP) for devices that support the protocol.
A real
-
time clock (RTC) provides up to 21 days of hold up time in the event of a
loss of power to the SPS.500 (product revision B or later).
An OPC UA compliant server provides access to diagnostic and status
information and configuration parameters. OPC UA tags are available using a
single connection to an OPC UA client. Diagnostic, status, and configuration
information is also available using a single connection to the Bedrock IDE.
The SPS.500 can be installed in either panel or pipe mount configuration. The
enclosure is compliant with IP66/67 (dust tight, protection against water jets,
and immersion) and NEMA ratings 4 and 6 (dust tight, water tight, protection
against hose directed water, and immersible).
Bedrock Automation has received several certifications for FCC, CE, IEC, and
EMP testing as well as UL approval for Industrial Control Equipment (UL 508).
See Appendix C, Certifications, Approvals, and Testing for a complete list.
Additional features include:
• tri
-
colored status LED and network activity LEDs
• two type C relay outputs.
