Assembling Your Stand
Assembling Your Stand
4
2
2
Assemble the Base
You will need:
Base with wheels and axle (part 4) Bottom Pole (part 7)
1
1
Attach Ring to Backboard & Top Pole
You will need:
Backboard (part 1) Ring (part 2)
Top Pole (part 5) 4 x Bolts, Nuts & Washers A (M8 x 35mm)
Fix the Ring (part 2) to the Backboard (part 1) and the square metal plate at the top of the Top Pole (part 5)
simultaneously using four Bolts, Nuts & Washers A (bolt and washer at the front, and securing with a washer and
nut at the back).
Place the base on a solid flat horizontal surface. Fix the Bottom Pole (part 7) and the Wheels to the base using the
Wheel Axle (part 4).
Slide the metal wheel axle through the bottom pole and wheels in the following order;
Base > Wheel> Base > Bottom Pole > Base > Wheel > Base
You may need to pull the metal rod/wheel axle towards you slightly in order to get it to slot through all the parts.
