fig 9
Charging your scooter
1, Connect the output plug to the socket of electric scooter.
2, Connect the input plug to the AC power socket (
wall socket
).
3, When the indicator shows
RED
,
It means charging.
The charging lasts 1-12 hours.
(the time is directly dependant on the capacity of the battery).
4, When indicator turns
GREEN
, it means that the battery is fully charged.
5, Remove the plug from AC power socket.(
wall socket
).
6, Remove the output plug from the scooter socket.
WARNING !!
DO NOT
leave charging for more then 5 hours after fully charged.
Chargers should only be used for scooters that it is supplied for.
DO NOT USE THE CHARGER IN THE FOLLOWING ENVIROMENTS
1, Direct sunlight / High temperatures.
2, Dusty surrounding.
3, In wet or damp environment
10
Main on/off switch
When your scooter is
not in use turn off
main power switch.
This will help
conserve your
battery power
Summary of Contents for Hero
