27
EN
Air Joy Hot & Cool
BEEM - Elements of Lifestyle
Troubleshooting
The following table will help you locate and eliminate minor faults:
Fault
Possible cause
Remedy
The indicator lamp does
not light up after switching
on
.
Plug not inserted into socket.
Insert plug.
Fuse in electrical distribution
board switched off.
Switch on fuse.
The indicator lamp
extinguishes after a few
seconds.
The appliance is not stable
and the safety switched has
switched it off.
Place the pedestal of
the appliance on a firm
and flat surface.
The fuse in the distributor
box triggers.
Too many appliances con-
nected to the same power
circuit.
Reduce the number of
appliances on the power
circuit.
No fault detected.
Contact customer
service.
The airflow is too weak.
There is contamination in the
air inlets or between the air
slots.
Eliminate possible con-
tamination as described
in the section
Clean-
ing and maintenance
(page 25)
.
The appliance switches
itself off.
The appliance is tipped and
the safety switched has
switched it off.
Place the pedestal of
the appliance on a firm
and flat surface. so that
it cannot tip.
The overheat protection has
switched off the appliance
because an ambient tem-
perature of approx. 30° C
was reached and/or the setup
location is constricted.
Allow the appliance and
surroundings to cool
down and ensure space
for the air to circulate.
The appliance cannot
switch to warm air or
switches itself off after a
few seconds.
The surrounding temperature
is too high which triggers the
overheat protection.
Switch on the appliance
only when the tempera-
ture of the appliance
and the surroundings
has fallen.
NOTE
If you cannot resolve the problem with the steps described above, please contact
►
customer service.
Summary of Contents for Air Joy Hot & Cool
