M U X L I C E R
P O W E R & I N T R O
P O W E R I N G T H E
M O D U L E
U S E R M A N U A L
T H A N K S F O R P U R C H A S I N G A M O D U L E F R O M B E F A C O !
B E F O R E Y O U P L U G T H I S M O D U L E I N . . .
1.
Disconnect your cabinet from the mains.
2.
Triple check the power cord polarity.
The coloured line on the cable
(pin number one) is the -12V rail.
3. If you plug the module backwards you might burn it out and
unfortunately this is not covered by the warranty.
4. If you have any questions about this product feel free to contact us:
befacosynth@gmail.com
I N T R O D U C T I O N
W H A T I S M U X L I C E R ?
Muxlicer is an eight channel, CV addresable bidirectional analog switch and gate
generator. It is designed with a high "function per HP ratio" philosophy, to have maximum
flexibility in minimum space. It is divided in three main blocks:
1.
Digital Step Controller
Featuring Tap Tempo, Voltage controlled address
and two on board clock dividers/multipliers (one
for Clock IN and one for Clock Out).
2.
Gate Generator
With independent Mix and EOC outputs, voltage
controlled repetition and behaviour.
3.
Analog Switch (a.k.a Mux/DeMux)
Each I/O can pass analog or digital signals in
either direction.
.1
WI TH TH I S TH I N GY I N STALLED I N YOU R R ACK YOU CAN :
* Route any modular audio or CV signal from one IN up to eight OUTs or viceversa.
* Generate CV and Gate signals, been able to work as Sequencer.
* Cut audio signals in rhytmical slices with independent volume.
* Chop different audio signals in a rhytmical way.
* Generate complex CV/Gate patterns from any audio or CV moving signal.
All manuals and user guides at all-guides.com
