To identify right hand and left hand rake wheels, set the rake wheels up against a wall
with the tine clips facing the wall and the inner wheel facing away from the wall. On a
right hand wheel the rake teeth touching the ground will bend towards the right. On a
left hand rake the rake teeth touching the ground will bend towards the left
(see fig. 4)
.
3.04 - Pre-Operational Check
IMPORTANT:
Check each of the following, carefully, prior to engaging the equipment:
1. No wrappings or foreign objects are around the implement.
2. The teeth are properly installed and the bolts properly torqued
4
.
3. All hardware is tight.
4. No people or animals are in the work area.
3.05 - Attaching to the Tractor
Models RS2-04, RS2-05 and RS2-06 may be used on tractors from 30 to 80 HP and a
category 1 three point hitch
5
.
DANGER: Never allow anyone to stand between the hay rake and tractor during
hookup operations.
O
PERATION
13
BEFCO
H
AY
R
AKES
O
PERATOR
’
S
M
ANUAL
5
Refer to Table 2 - Technical Features, page 23.
4
Refer to Table 1 - Torque Specifications, page 23.
Fig. 4 - Rake wheel identification
left hand rake wheel
right hand rake wheel
inner wheel
facing out
Summary of Contents for RS2-04L
