Once the field has been raked raise the three point hitch so the rake wheels are clear
off the ground. Always engage the lock plate before transporting the unit to and from its
storage location
(see fig. 5)
. Insert the locking pin in the transport position hole and
secure it with the Ø4 hairpin cotter
(see fig. 6)
.
Before transporting the rake on public roads, disengage the locking lever
(see fig. 5)
on
the pivot housing and turn the support arm 90° so that it sits vertical over the three point
hitch
(see fig. 10)
. Re-engage the locking lever and secure it with the locking pin and
the Ø3 hairpin cotter. Tighten the turnbuckle on the three point hitch in order to angle
the rake forward and increase the rake wheels clearance from the ground
(see fig. 10)
.
Some tractors may not have enough lift clearance to raise the support arm of larger
rakes to the 90° position and off the ground enough to transport them on the road.
On models RS2-05 and RS2-06 it will be necessary to turn the arm with hub furthest to
the back by 90° so that it sits horizontally to the three point hitch when the rake is in the
transport position
(see #2 & 3, fig. 11)
.
Before transporting:
1. Always select a safe ground speed that is appropriate for the terrain.
2. Beware of traffic on public roads. Install a SMV (Slow Moving Vehicle) sign when
traveling on roads or streets. Comply with all federal, state and local laws.
3. Reduce ground speed when turning and take care that the implement does not strike
obstacles such as trees, fences or buildings.
IMPORTANT: Always remember to engage the lock plate (see fig. 5) and
reposition the locking pin in the transport position hole before transporting the
hay rake (see fig. 6).
O
PERATION
20
BEFCO
H
AY
R
AKES
O
PERATOR
’
S
M
ANUAL
Fig. 11 - Transporting the hay rake
1. RS2-04
2. RS2-05
3. RS2-06
Summary of Contents for RS2-04L
