background image

Page 4 of 14

 

For your child’s safety, Please read the instructions car efully below. Carelessness or 
improper operations may cause danger that should be avoided. 
 
1. Please read the car manufacturer's handbook during use of child restraint system 
with ISOFIX. 
2. The instruction can be kept in the reserved place of the child seat within the usage 
period. 
3. Do not use this child seat in home. It isn’t designed for home use and should only 
be used in your car. 
4. Be sure that children are not left in their child restraint system unattended. 
5. The child restraint system should be changed when it has been subject to violent 
stresses in an accident. 
6. Any straps holding the restraint to the vehicle should be tight; Restraining the child 
should be adjusted to the child's body, and should not be twisted. 
7. Any lap strap should be worn low down, so that the pelvis is 

rmly engaged, shall 

be stressed. 
8. Be sure any luggage or other objects liable to cause injuries in the event of a 
collision shall be properly secured. 
9. The rigid items and plastic parts of a child restraint shall be so located and installed 
that they are not liable, during everyday use of the vehicle, to become trapped by a 
movable seat or in a door of the vehicle. 
10. It is danger to make any alterations or additions to the device without the approval 
of the Type Approval Authority, and it is also danger not following closely the 
installation instructions. 
11. It is extremely dangerous to use any load bearing contact points other than those 
described in the instructions and marked in the child restraint. 
12. The child restraint shall not be used without the cover; The seat cover should not 
be replaced with any other than the one recommended by the manufacturer. 
13. The child should be taken out from the car seat when it is being moved or 
adjusted.(except adjusting the headrest) 
14. Please do not buy a second hand safety car seat. Because you may not know the 
using history of the child seat. It may have been in an accident or lack some parts. 

 

  Warning 

Summary of Contents for BFL102A















Reviews: