Position / Status
Direction
CW / CCW
„Direction“ you can change the direction of rotation between clockwise (CW) and
counter clockwise (CCW).
CW: Value increases with clockwise rotation.
CCW: Value decreases with counter clockwise rota
Changing the direction of rotation
Preset Position:
Set drive to desired position and stop. Set zero point in drive standstill (
Attention: Failing to store the calibration
7
/
8
Position / Status
CW / CCW
“ you can change the direction of rotation between clockwise (CW) and
counter clockwise (CCW).
CW: Value increases with clockwise rotation.
CCW: Value decreases with counter clockwise rotation.
Changing the direction of rotation also changes the displayed position value
Preset Position:
with „Preset” set to 0 at the actual position.
Set drive to desired position and stop. Set zero point in drive standstill (
Attention: Failing to store the calibration and preset will cause the results to be lost.
“ you can change the direction of rotation between clockwise (CW) and
changes the displayed position value.
Set drive to desired position and stop. Set zero point in drive standstill (Preset).
will cause the results to be lost.
Summary of Contents for MIG-AST
Page 4: ...Further 4 8 ...
