Bego 25750 Translation Of The Original Instructions Download

Page: 19 / 58

English

⋅

Regulus

6 BA

-en/

Safety instructions

Regulus is exclusively intended for the extraction of
kiln gases from BEGO preheating ovens. Any other
use is considered to be improper. We shall not be
liable for any damage resulting from improper use.

The safety instructions must be followed in order to
prevent personal injury and damage to the machine.
We shall not be liable for damage due to failure to
comply with the safety instructions.

General Safety Instructions

Place of use -

The unit has been designed solely

for use in dental laboratories and comparable estab-
lishments for research, commercial and training
purposes.
The unit must only be used in dry rooms.

Operator and operating personnel -

The unit

must only be operated by dental professionals, or
they must provide supervision if trainees or other
persons operate unit.
Wear the protective clothing prescribed for use in
dental laboratories and observe the rules of
conduct.
The unit may only be operated by staff members
who are familiar with and follow the instructions of
this operating manual.
The operating manual must be easily accessible
when the machine is operated. Observe the national
accident prevention regulations in addition to this
operating manual.

Handling the machine -

Prior to the electrical

connection check whether the specifications on the
rating plate correspond to the power supply
network. In the case of uncertainty, consult an
electrician.
The unit is categorised under protection class 1 and
may only be connected to Miditherm 100 MP/
200 MP.
Modifications of the machine are not permitted.
Always keep signs and stickers such that they are
easy to read. They must not be removed.
Check the machine and leads for damage regularly.
The machine must not be operated if it has any
defects that may result in risks for the employees or
third persons.
Protect the leads against heat, oil and sharp edges.
The leads must not be used to carry the machine or
to pull out the mains plug.

Repairs -

Repairs may be carried out solely by

BEGO customer service or by persons authorised
by BEGO customer service.

Metallic housings

must be grounded properly so

as to prevent them from carrying current. Otherwise
they are extremely dangerous because the
housings may be live due to damage to the
machine! Since a check to ensure a de-energized
state is mandatory after every intervention in the
machine (Germany: check in accordance with DIN
VDE 0701-1), only qualified electricians may open
the machine!
Only BEGO replacement and wearing parts may be
used.

Care and maintenance -

The unit has been

designed for a service life of 10 years from the date
of manufacture. No liability is accepted for damages
arising from operation of the unit after this period.
Switch off the machine and pull out the mains plug
before performing any care, cleaning or mainte-
nance work.
Only use dry or slightly moist cloths for cleaning. Do
not spray the machine with water or immerse it in
water.