10
A
-en
/0
1
English
⋅
en
Operating and control elements
1
LCD display
2
HOME button: Return to main menu
3
Left and right button
4
Up and down button: Navigate through menu
items
5
OK button: Confirmation button
Basic principles
VARSEO XS uses a powerful LED light source to
create plastic objects by means of solidifying liquid
resin mixtures. To prevent premature solidifying of
the resin mixture it must only be used in an area that
is protected from light or darkened, respectively. For
that purpose, the Varseo XS is equipped with a
protective cover. There will still be some non-solid-
ified (wet) resin mixture on the object after the print
job has been completed. Any further solidifying of
the resin reduces the accuracy of the created object.
The objects are built in layers, which bond to each
other. Every new layer solidifies on the non-stick
film, which is located on the bottom of the resin tank.
Any damage to the non-stick film can lead to flaws
in the solidified layer and therefore causes flaws in
the object.
NOTE
Deviating functions are described separately.
CAUTION
Property damage
The resin is sensitive to light.
Protect (liquid) resin mixtures that
have not yet been solidified against
direct or strong light sources in the
area.
NOTE
IMPORTANT!
Check the bottom of the resin tank
for damage prior to every print job and replace
the resin tank, if necessary.
Summary of Contents for 26490
