background image

28

85

95

5 B

A

-en

/1

1

English 

⋅ 

Eltropol 300

en

Scope of delivery, accessories and consumables

Scope of delivery

Eltropol 300

100 … 240 V, 50 / 60 Hz ....................... REF 26310

with:

Polishing bath

2 magnetic stirrers

2 object hooks

10 crocodile clips

1 supplementary cathode

1 spare clamp with holder

2 power cables (EU, USA, or ZA plug)

Operating Instructions

Accessories

REF

Straight cathode for the supplementary
cathode.......................................................... 17003

Supplementary cathode ................................ 17000

Consumables

REF

Wirolyt polishing liquid (1.0 litre).................... 52460

Technical data

Height..........................................................452 mm

Width ...........................................................400 mm

Depth ..........................................................275 mm

Weight (empty)................................................10 kg

Capacity of polishing bath ............................. 2 litres

Nominal voltage................ 100 … 240 V, 50 / 60 Hz

Maximum power consumption......................200 VA

Maximum polishing current ..............................10 A

Noise emission ...................................... < 70 dB (A)

NOTE

The spare parts list is appended.
When ordering spare parts please quote the REF, 
quantity and equipment serial no. (SN).

Summary of Contents for Eltropol 300





















Reviews: