Fundor T
10
Care
l
Keep centrifugal chamber clean.
l
Set the flame of the Multiplex melting torch so that
it is just right to avoid overheating
the surface of
the unit.
Crucibles care
l
Always preheat crucible together with mould to
cast.
l
Glaze new crucible for precious metal alloys with
Auromelt HF melting powder prior to inserting the
alloy.
Danger of burns due to hot parts!
Carry out maintenance and cleaning work prior to casting or once the unit has cooled down..
CAUTION!
Switch off the unit and pull out the plug prior to any care or maintenance!
Working
Important!
We recommend to use the following base socket moulds for metal mould rings only:
Base socket mould for metal mould ring - size 3 ................................................................ Order no. 52 627
Base socket mould for metal mould ring - size 6 ................................................................ Order no. 52 628
Base socket mould for metal mould ring - size 9 ................................................................ Order no. 52 629
