Fundor T
11
Troubleshooting
Fault
Reason
Remedy
The lid cannot be opened
no current
Connect the machine to the network,
switch on and wait 15 sec.
Without current:
Open the lock with a thin bar
or a screw driver (see fig. 3).
magnetic lock is closed
Wait approx. 15 sec.
after having switched on.
After closing the lid (casting)
wait approx. 35 sec.
Centrifuging
„Prepare“ forgotten
Put the calliper on „Prepare“,
does not function
open the lid, remelt the alloy.
fuses are defective
Always first switch off
the unit and pull out
the plug!
Replace the fuses:
see pos. 6 in fig. 4 and/or fig. 1.
Machine moves
installation not correct
See „Installation“.
when centrifuging
out-of balance in arm
See „Operation“.
Fig. 3
