F&E Equipment
Service manual V1.0 Gelovit 200
Autor : Fin/DW
Stand 11.02.09
Seite 3 von 6
3. Connections and LEDs
LED cover
LED heater (bottom) LED heater (top)
connections of the motor
Wiring of the Motor (from left to right): Red - black - green - yellow - white - Gray
4. Settings
4.1 Shifting °C / °F
Press and hold the timer button and the cycle button and switch on the device. When the
device has beeped 4 times, release the buttons. The new setting will be displayed.
