14
860
76
D
B
-en/
03
35
5.0
00
32
English
⋅
LaserStar T Plus
en
Touch screen
Fig. 5
Main menu
All of the functions of the laser can be executed by
touching the symbols or texts on the touch screen.
The Fig. 5 shows the main menu for an operating
mode in which not all the functions are activated.
Depending on the current operating mode, a few of
the shown symbols may be missing.
Some functions are only optional.
Operating elements in the working cham-
ber
The main functions can be controlled by the
operating elements on the console inside the
working chamber.
Fig. 6
Control elements in the working chamber
Footswitch
The unit comes standard with a digital footswitch for
triggering pulses and - depending on the configu-
ration and setting of the device - for switching the
exhauster and the inertgas.
The footswitch is connected to the system with
flexible cable and can be moved into any position
comfortable for the operator. The footswitch is
equipped with a strap to easily draw the footswitch
towards the user.
NOTE
When touching small symbols (such as using the
keyboard of the
→
ALPHANUMERIC INPUT
WINDOW), it is recommendable to use a thin but
not sharp object.
NOTE
The individual functions of the main menu and
the submenus are explained in the section
DESCRIPTION OF THE MENUS.
V– / V+
Change the current value for the
lamp voltage
M– / M+
Select the memory location number
for saving / loading laser parameter
sets (see sections SAVING LASER
PARAMETERS and LOADING
LASER PARAMETERS).
Hz– / Hz+ Set the pulse frequency.
Ø– / Ø+
Set the diameter of the focal spot.
ms– / ms+ Set the required value for the
duration of the laser pulse.
