34
860
76
D
B
-en/
03
35
5.0
00
32
English
⋅
LaserStar T Plus
en
Saving laser parameters (memory manager)
Fig. 30
Alphanumericinput window
2.
Enter the desired parameter value via the
touchscreen keyboard (details
→
ALPHANU-
MERIC INPUT WINDOW) and confirm the
input with [
↵
].
The input window is closed and the entered value
is indicated in the main menu.
NOTE
If you have entered a value exceeding the
permitted limits and confirmed it with [
↵
] the
max. permitted value is taken and indicated in the
main menu with red numerals.
The currently set laser parameters (including the
selected pulse shape, inert gas and MicroWeld™
settings) can be saved for later uses.
1.
Touch the storage space name to open the
memory manager:
Fig. 31
Example for laser parameter
[ Up ] / [ Down ]
2.
Scroll with these buttons until the desired sto-
rage space is indicated in the list.
[ Save ]
3.
Touch the [ Save ] button.
The prompt Chose a memory position to
save is indicated below the list and the text of
the [ Save ] button changes to [ Save to … ].
4.
Touch the line in the list where the parameter
is to saved.
The
→
ALPHANUMERIC INPUT WIN-
DOW is opened with the prompt Please enter
program name.
[ Save in ]
5.
Enter a name for the storage space (max.
length 16 characters) and confirm with [
↵
].
The laser parameters set in the main menu
are stored under selected memory space. The
previously saved laser parameters are over-
written without any warning.
The memory manager is closed; return to
the main menu.
