42
8
5
8
1
7
B
A
-e
n
/1
2
3
0
6
.0
1
2
6
9
…/
3
0
7
.0
0
8
0
4
…
English
⋅
Miditherm MP
en
Starting a program with Finished time
1.
Switch on the unit. The current temperature of
the furnace is displayed after approx.
3 seconds.
2.
Select program:
•
Press
as often until LED # lights up.
•
Press
until desired program number
appears.
3.
Call up Finished time:
Press
(LED
flashes).
4.
Setting the weekday:
Press
.
1 = Monday, 2 = Tuesday, … , 7 = Sunday
5.
Setting the time of day
Hours:
•
Press
(LED
flashes).
•
Press
for Finished time (hours)
Minutes:
•
Press
(LED
flashes).
•
Press
for Finished time (minutes)
6.
Exit Finished time mode:
Press
once (LED
lights up).
NOTE
•
Setting the current time and date:
→
page 44.
•
The furnace will start automatically so the
selected program is completed at the set Fin-
ished time.
•
Information on the time of the automatic start:
press
.
•
Delete a Finished time (LED
lights up):
press
.
•
If the calculated and the actual Finished time
deviate significantly from each other (over
30 minutes), a correction program can be
started: when switching on the unit, keep the
button depressed (display shows P).
Attention: The correction program lasts approx.
8 hours!
