Specifi cations
Synthesizer Architecture
Number of voices
Monophonic
Type
Analog
Oscillators
3 (0.1 Hz to 20 kHz in 6 overlapping ranges)
LFO
1 (0.05 Hz to 200 Hz, up to 300 Hz with external CV input)
VCF
1 switchable low pass or high pass (24 dB/octave slope)
Envelopes
VCA, VCF
Connectivity
MIDI In/Thru
5-pin DIN / 16 channels
USB (MIDI)
USB 2.0, type B
High output
¼ " TS, unbalanced, max. 0 dBu
High output impedance
1.2 kΩ
Low output
¼ " TS, unbalanced, 30 dB below high output
Low output impedance
1 kΩ
Headphones
3.5 mm TRS, unbalanced, max. -3.5 dBu
Headphones output impedance
8 Ω
USB
Type
Class compliant USB 2.0, type B
Supported Operating Systems
Windows XP or higher
Mac OS X 10.6.8 or higher
Controllers Section
Knobs
Tune: -2 to +2
Glide: 0 to 10
Modulation mix: (OSC 3 or fi lter EG) to (noise/ext mod source,
or LFO)
Modulation depth: 0 to 10
LFO rate: 0 to 10
Switches
Modulation source: OSC 3 or fi lter EG
Modulation source: (noise or external modulation source) or LFO
LFO waveform: triangular or square
Oscillator Bank
Knobs
Range (OSC 1, 2, and 3): LO, 32', 16', 8', 4', 2'
Frequency (OSC 2 and 3): -7 to +7
Waveform (OSC 1 and 2): triangular, triangular/saw, saw,
square, wide pulse, narrow pulse
Waveform (OSC 3): triangular, reverse saw, saw, square,
wide pulse, narrow pulse
Switches
Oscillator modulation on/off
OSC 3 control (by keyboard) on/off
Mixer Section
Knobs
Volume (OSC 1, 2, and 3): 0 to 10
Volume (external input): 0 to 10
Volume (noise): 0 to 10
Switches
OSC 1, 2, and 3: on/off
External input: on/off
Noise: on/off
Noise source: pink or white
LED
Overload
Filter Section
Knobs
Cutoff frequency: -4 to +4
Filter emphasis: 0 to 10
Amount of contour: 0 to 10
Attack: 1 ms to 10 s
Decay: 4 ms to >35 s
Sustain: 0 to 10
Switches
Filter mode: low pass/high pass
Filter modulation: on/off
Keyboard control 1: on (1⁄3) or off
Keyboard control 2: on (2⁄3) or off
Filter decay: on/off
Output Section
Loudness contour
dynamic range:
80 dB
Knobs
Volume: 0 to 10
Headphone volume: 0 to 10
Amount of contour: 0 to 10
Attack: 1 ms to 10 s
Decay: 4 ms to >35 s
Sustain: 0 to 10
Switches
Main output: on/off
A-440: on/off
Loudness decay: on/off
LED
Power
Inputs (TS 3.5 mm)
Modulation source
Noise is the modulation source if there is no connection present
Oscillator 1
Control voltage: 1 V per octave
LFO
Control voltage: -5 V to +5 V
External input
Input impedance: 1 MΩ
Cutoff frequency
Control voltage: 0 to +5 V controls the cutoff frequency
Loudness
Control voltage: 0 to +5 V controls the loudness
Filter contour
Gate: +5 V input triggers the fi lter contour
Loudness contour
Gate: +5 V input triggers the loudness contour
46
47
Quick Start Guide
MODEL D
Summary of Contents for MODEL D
Page 28: ...We Hear You ...
