Operation
4
Operation
4.1 Configure the CloudVPN Router
To configure your CloudVPN Router, log in to your remote access account
and navigate to the [Tools] page. Here you can generate an CloudVPN Router
configuration file by following a few simple steps. You can then download the
configuration file, which must be copied onto a USB flash drive. After supplying
power to the CloudVPN Router, insert this USB flash drive in the USB port. The
CloudVPN Router will register itself to Beijer Electronics’s remote access
and set up a secure VPN connection. You can further configure the CloudVPN
Router via the remote access (
https://remoteaccess.acirroplus.c
).
4.2 LED status indicators
The CloudVPN Router has two LEDs for router status: one signal LED (3G,
4G, Wi-Fi signal) and one activity LED. The CloudVPN Router requires
approximately
2 minutes
to boot up and set up a secure connection.
Signal LED
Beijer, MAEN327
13
