Operation
Signal
Colour
Description
Blinking blue 2 pulses
Setting up a VPN
connection
Constant blue
Active VPN connection
to the remote
access
Warning:
This action cannot be undone! All settings will be reset to factory default.
The CloudVPN Router can be reset to the factory default settings by pressing
and holding the reset button on top for 5 seconds. The ACT LED will blink
while the reset button is pressed. Upon release of the button, the ACT LED will
rapidly blink if the button was pressed long enough to trigger a reset. Wait for the
CloudVPN Router to restart. You can then configure the CloudVPN Router
again.
Note:
Remove previous registration
If the CloudVPN Router was previously registered on the remote access you’ll
have to remove it from the remote access before you can register it again.
Beijer, MAEN327
15
