Installation
3.2 Installing a SIM card
The SIM card slot suits a standard SIM card (size 2FF).
To insert, push the SIM card into the slot until you feel a click. This is
approximately 1 mm inside the device. Release the card and the card will stay in
the device. The end of the SIM card should be aligned with the outside of the
enclosure.
To remove, push the SIM card firmly into the slot until you hear a click. Releasing
will cause the SIM card to partially eject, allowing you to easily take out the card.
3.3 Power supply
The CloudVPN Router must be powered by an IEC/UL/EN/60950-1 certified
Limited Power Supply (LPS) or for the United States a Class 2 power supply. The
LPS power supply is not included in this package.
Power supply
12-24 VDC +/- 20% LPS 2A
Internal voltage protection
29V max
Input protection
Protected against polarity
inversion
Isolation
1.5 kV
Beijer, MAEN327
11
