Product Specifications
12
Beijer Electronics, MAEN945B
3.5 Power Supply and Wiring
H-T40m must use the power supply with 24 V DC and the power consumption
is 4 W.
Perform the following steps to wire the power connector:
1. Unplug the power connector and unscrew the screws.
2. Strip approximately 7-8 mm of insulation. Insert the wire all the way into
the power connector and then turn the screws tight.
3. Plug in the connector to the power input of the operator terminal.
Use copper conductors only, 60/75
°
C.
Warning:
To avoid an electrical shock, be sure to switch off the power before connecting the
communication/download cable to the operator terminal.
Note:
The power connector is already plugged into the power input of operator terminal
when the package is first opened.
Type
Wire Gauge
(AWG)
Stripped
Length
Torque
Solid
28-12
7-8 mm
4.5 lb-in
Stranded
30-12
7-8 mm
4.5 lb-in
FG
-
+
DC 24V
