User Guide Revision 1.12
24
5.
Managing the Keypad
The drive is configured and its operation monitored via the built in keypad and display.
IP20 Drives:
IP20 rated drives are supplied with a 7 Segment LED display and a five button keypad (Start, Stop, Navigate, Up, Down)
IP55 and IP66 Drives:
IP55 and IP66 rated drives are supplied with an OLED multi-line text display and a seven button keypad (Start, Stop,
Navigate, Up, Down, Hand, Auto)
Commissioning and operation of the drive with the two different Keypads and displays is detailed below.
5.1.
Keypad Layout and Function – Standard LED Keypad (IP20 Drives)
NAVIGATE
Used to display real-time information, to access
and exit parameter edit mode and to store
parameter changes
UP
Used to increase speed in real-time mode or to
increase parameter values in parameter edit
mode
DOWN
Used to decrease speed in real-time mode or to
decrease parameter values in parameter edit
mode
RESET /
STOP
Used to reset a tripped drive.
When in Keypad mode is used to Stop a running
drive.
START
When in keypad mode, used to Start a stopped
drive or to reverse the direction of rotation if bi-
directional keypad mode is enabled
5.2.
Changing Parameters – Standard LED Keypad (IP20 Drives)
Procedure
Display shows...
Power on Drive
Press and hold the
for >2 seconds
Press the
Key
The
and
can be used to select the desired parameter
etc..
Select the required parameter, e.g. P1-02
Press the
button
.
Use
the
and keys to adjust the value, e.g. set to 10
.
Press the
key
The parameter value is now adjusted and automatically stored. Press the
key for >2 seconds to return to
operating mode
Summary of Contents for HVAC H2
Page 1: ......
Page 72: ...User Guide Revision 1 12 72 82 H2MAN BE_V1 11...
