“精锐”压缩冷凝机组
“SLIM POWER”CONDENSING UNIT
百
尔
制
冷（无
锡）有
限
公
司
Beijer Ref (Wuxi) Co. Ltd
PN:
YAL0002-60
Issue:
D
Date: 01/01/20
Page: 9 of 26
EN:
9
They are not intended for environments that may have harmful, corrosive or flammable
atmospheres. Marine environments are considered corrosive; please consult Beijer Ref before
installing in this environment.
1.17
标准设计工况
Standard Design Conditions
“精锐”压缩冷凝机组，中温使用谷轮
ZB
压缩机，低温使用
ZF/ZFI/ZSI
压缩机。
中温系列使用
R404A
制冷剂时，蒸发温度范围从
-15
℃
到
+5
℃
。
中温系列使用
R22
制冷剂时，蒸发温度范围从
-10
℃
到
+10
℃
。
低温
X
系列使用
R404A/R22
制冷剂时，蒸发温度范围从
-40
℃
到
-20
℃
。
低温
N
系列使用
R404A/R22
制冷剂时，蒸发温度范围从
-30
℃
到
0
℃
。
低温
N-F
系列使用
R404A/R22
制冷剂时，蒸发温度范围从
-40
℃
到
-20
℃
。
“SLIM POWER” condensing units use Copeland ZB series compressor for Medium temperature
range, ZF/ZFI/ZSI series compressor for Low temperature range
Medium temperature range, with refrigerant R404, evaporating temperature is from
-15
℃
to +5
℃
.
Medium temperature range, with refrigerant R22, evaporating temperature is from
-10
℃
to +10
℃
.
Low temperature range, X-series units with refrigerant R404/R22, evaporating temperature is from
-40
℃
to -20
℃
.
Low temperature range, N series units with refrigerant R404/R22, evaporating temperature is from
-30
℃
to 0
℃
.
Low temperature range, N-F series units with refrigerant R404/R22, evaporating temperature is
from
-40
℃
to -20
℃
.
详细的蒸发温度范围及数据请参考样本
For usage data, evaporating temperature ranging and any more details, please refer to product catalogue.
对于特殊设计要求的
(
非标工况
/
制冷剂
),
请咨询当地分公司或者上海分公司电话
: 021-64071616
2.
拆卸与调试说明
Installation Instructions
2.1
一般说明
General Notes
2.1.1
机组的提升
Lifting of Unit
该机组重量较大，在提升时要特别小心
.
压缩机是机组的核心部件，在提升时应注意压缩机的所在位置，叉脚应位于机组的底部，并根据
其重量分布调节合适的宽度。
在提升或运输机组的过程中务必注意保持平衡
The unit weight is heavy, ensure proper lifting and installing
The compressor is the core component of the unit, and should pay attention to the
position of the compressor in the lifting, the Forklift of Truck should be located at the
bottom of the unit, and adjust the appropriate width according to the weight distribution
.
