X2 Control communication with BFI-E3 by Modbus TCP
SER0020_V1.0.0 2020-11
10 (31)
Nor
m
a
l.d
o
tm
,
2
0
2
0
-07
-01
7
Connect BFI-Tools to BFI-E3 through Ethernet
BFI-Tools can only communicate with one BFI-E3 at a time. How to set up the communication is:
-
Choose way of communication with BFI.
1.
Chose Ethernet Module.
2.
Set the Local PC IP-adress to 192.168.1.x were 0 < x < 250
3.
Re-Scan Network to find BFI-E3s in the network or tap in the IP-adress manually
4.
All BFI-E3 available in the Network will appear.
5.
Chose which BFI-E3 to communicate with. Then push connect to start up communication.
And after connection BFI-Tools works in exactly the same way as when using other ways of communication.
