X2 Control communication with BFI-E3 by Modbus TCP
SER0020_V1.0.0 2020-11
6 (31)
Nor
m
a
l.d
o
tm
,
2
0
2
0
-07
-01
Modbus TCP port of BFI-E3
BFI-E3 of all voltages and current ratings exists in two versions, one with and one without built-in Modbus
TCP. Modbus TCP is available in all BFI-E3 with the extension -MTP. For example:
Without Ethernet ports:
BFI-E3-12-0023-1F1A, Item number 63510
General Purpose Inverter 0,37kW, 2,3A, Input 1x230 V AC, Output 3x230 V AC, IP66, No Brake
transistor, EMC, Size 1
With Ethernet ports:
BFI-E3-12-0023-1F1A
-MTP
,
Item number 63510-MTP
General Purpose Inverter 0,37kW, 2,3A, Input 1x230 V AC, Output 3x230 V AC, IP66, 2 Ethernet Modbus
TCP ports, No Brake transistor, EMC, Size 1
The 2 Ethernet ports are marked P1 and P2 and have the same IP-address.
The 2 ports on the left side marked D1 and D2 are serial ports not intended for Ethernet. Faulty connection
of cables might cause damage to either BFI-E3 or other equipment.
