Chapter 10 JF type sequin embroidery
Chapter 10
JF Type Sequin Embroidery
10-1
Brief Introduction on Sequin Embroidery
Sequin embroidery is formed by sequins and stitch forms. We need choose those hard
materials with smooth surfaces as the sequins. With the sequin in different colors, sizes and
shapes, embroidery will be shining and have amazing effect. Design with Sequin codes has its
own format.
JF type multi-sequin embroidery of BECS-D56 machine is divided into two types: one is
normal multi-sequin design, made by normal design making method. The other one is special
multi-sequin design made by normal design software with special making method.
For normal one, you should set sequin mode when you modify the color-changing order.
Special multi-sequin design can be directly embroidered only after modification of
color-changing order.
Meanwhile, the machine can automatically change normal multi-sequin design to special
multi-sequin design during the process of input. The special design will save all the sequins
within normal design as sequin A. If you want further modification on the sequins, you can use
“sequin edit” to modify the sequin design. After that, the multi-sequin deign will turn to the
special multi-sequin design.
Note: Refer to appendix 4 for special design making rules.
A.
Application Scope:
This system applies on sequin embroidery control system which combines normal embroidery
head, special embroidery head and sequin-feeding mechanism.
B.
Features and Functions:
1.
Two ways for sending sequin: Roller Type and Lever Type;
Roller: the core part in the whole mechanism is a wheel-like device. Its operating principle is to
rotate continuously in one direction so as to send sequins into position.
Lever: the core part is staff linkage. Its operating principle is to use the retrieval movement of
the linkage to send the sequins into position.
2.
Separate action of sequin mending and sequin feeding mechanism
3.
Manual separate or collective sequin-feeding at one time
4.
Separate display of sequin working status
5.
Sequin feeding type and feeding angle can be changed via control panel.
BECS-D56 computerized embroidery machine owner’s manual
107
Summary of Contents for BECS-D56
Page 2: ......
